Special Offers

Free Filter Friday

       You read that right Salt Lake City! Come in on Friday to receive your free furnace filter! One of the main causes of a heating and cooling system to not function correctly is a clogged filter. The filter in your ventilation system collects dust, germs, pollutants, odors and many other contaminants in the air. Make sure your filter is clean. 

Tune Ups

       Welch Heating & Air Conditioning performs the best Precision Tune-up in Salt Lake City. Our Precision Tune-Ups are very thorough and take approximately 1.5 to 2 hours to perform. There is no sense in doing maintenance if your not going to do it right! The benefits of having Welch Heating & Air Conditioning perform your tune-up include: lower utility bills, extended equipment life, more dependable equipment, improved capacity, quieter operation, better comfort and peace of mind in knowing that it was all done thoroughly and properly. Equipment manufacturers feel very strongly about doing maintenance, to the point that if routine maintenance is not performed, it will void any manufacturers' warranties your equipment may have. This means possible costly repairs to the homeowner. Welch Heating & Air Conditioning Precision Tune-ups include the following:

Heating Precision Tune-Up ($135.00)

• Clean & Adjust Burner Assembly                    
• Clean Ignition Assembly   
• Clean Heat Exchanger 
• Monitor Flue Draft 
• Test Start Capabilities 
• Test Safety Controls
• Clean/Replace Your Standard 1" Filter
• Clean & Adjust Blower Components
• Tighten Electrical Connections
• Measure Volts/Amps (Power Usage)
• Lubricate All Moving Parts
• Adjust Thermostat Calibration/Program
• Clear Indoor Cabinet 
• Measure Temperature Differences
• Clean Indoor Cabinet 
• Ensure Proper Operation Of All Indoor Air Quality accessories

Cooling Precision Tune-up ($135.00)

• Clean & Adjust Blower Components
• Clean or Replace Your Standard 1" Filter
• Test Starting Capabilities
• Test Safety Controls
• Tighten Electrical Connections
• Measure Volts/Amps (Power Usage)
• Lubricate All Moving Parts
• Adjust Thermostat Calibration/Program
• Clean Evaporator Coil (if accessible)
• Clean Condenser Coil
• Clean Condensate Drain
• Measure Temperature Differences
• Check Refrigerant Charge
• Clean Outdoor Cabinet
• Ensure Proper Operation Of All Indoor Air Quality Accessories

 Options At The Time Of Installation

       There are additional options that may be added to your system at the time of installation for an added savings. Some of those options to be considered include, but are not limited to: humidifier, dehumidifier, or indoor air quality system. If you are getting a new funace installed or replacing an old one, you may want to add a coil which is needed for air conditioning. It is much easier, and cost effective, to install now as opposed to later.